Next, take your suction cups and place them in opposite corners of the screen, making sure to lock them in place so that they grab on to the glass. The screw won’t come all the way out, so just loosen the screw and then pull the plate out. On the bottom edge of the iMac, take your Phillips screwdriver and remove the lone screw, which will allow the memory access plate to come off. The iMac will angle up a bit because of the stand, but that’s completely fine. Unplug everything from your iMac and lay the machine down on a flat surface with the screen pointing up. , that way you’ll have all the bits you need no matter what. For this how-to, I’m working on a 2008 iMac, and the specific tools listed above are the ones needed for this particular model, but it’s possible that yours might have different sizes of Torx screws. Tweezers (Useful for when you accidentally drop screws in tight areas)ĭepending on what year your iMac is, you might need different sizes of Torx screwdrivers, which is why it’s a good idea just to get a Before you begin, you’ll need a few tools that you might not already have.
0 Comments
Leave a Reply. |